Paintless Dent Repair Cost Calculator
Estimate paintless dent repair (PDR) from dent count and size. Defaults are CarCalTune budgeting assumptions you can overwrite; the State Farm panel matrix is shown as an insurer reference, not a shop price list.
AAA Mid States: PDR prices start below $100 for a single small dent and are generally about 65% less than traditional body repair when paint is intact. A simple job is often under an hour. CarCalTune mid default for one dime-size dent: $100 (editable below).
Updated 2026-10-23 · Dollar figures are cited ranges (AAA, Metal Medic) or CarCalTune illustrative assumptions, never a named shop menu. State Farm cells are from that insurer’s PDR agreement matrix (read 2026-10-23).
Dent count × size estimate
Blank unit prices use CarCalTune mid defaults (dime $100, nickel $125, quarter $175, half-dollar+ $250). Multi-ding discount is off by default.
Unit price overrides ($ per dent) — blank = CarCalTune mid default
Result
PDR eligibility checklist (AAA)
Before trusting any PDR number, confirm the repair is even possible. AAA Mid States lists these limits:
- Paint must be intact — broken paint usually means conventional bodywork and refinish.
- Dent not too large; creased panels or metal stretched beyond memory are out of scope.
- Technician needs tool access behind the panel (bracing, double panels, and some edges block access).
- When PDR qualifies, AAA says it generally costs about 65% less than traditional body repair and keeps the factory finish.
CarCalTune unit defaults (illustrative)
These are budgeting assumptions, labeled as CarCalTune’s, not quotes from a named shop. They sit inside ranges published by Metal Medic’s technician guide ($75–$150 small; $150–$400+ larger) and AAA’s “below $100” floor for a single small dent.
| Size | Low | Mid (default) | High |
|---|---|---|---|
| Dime | $75 | $100 | $150 |
| Nickel | $100 | $125 | $175 |
| Quarter | $125 | $175 | $250 |
| Half-dollar+ | $150 | $250 | $400 |
What does dent count × size look like at mid defaults?
At CarCalTune mid units, three dime-size door dings total $300 (range $225–$450 if you sweep low–high units). Ten quarter-size dents at mid would be much higher — the table runs the calculator for each size × count pair.
| Size | Count | Mid unit | Low–high total | Mid total |
|---|---|---|---|---|
| Dime | 1 | $100 | $75–$150 | $100 |
| Dime | 2 | $100 | $150–$300 | $200 |
| Dime | 3 | $100 | $225–$450 | $300 |
| Dime | 5 | $100 | $375–$750 | $500 |
| Dime | 10 | $100 | $750–$1,500 | $1,000 |
| Dime | 15 | $100 | $1,125–$2,250 | $1,500 |
| Dime | 25 | $100 | $1,875–$3,750 | $2,500 |
| Nickel | 1 | $125 | $100–$175 | $125 |
| Nickel | 2 | $125 | $200–$350 | $250 |
| Nickel | 3 | $125 | $300–$525 | $375 |
| Nickel | 5 | $125 | $500–$875 | $625 |
| Nickel | 10 | $125 | $1,000–$1,750 | $1,250 |
| Nickel | 15 | $125 | $1,500–$2,625 | $1,875 |
| Nickel | 25 | $125 | $2,500–$4,375 | $3,125 |
| Quarter | 1 | $175 | $125–$250 | $175 |
| Quarter | 2 | $175 | $250–$500 | $350 |
| Quarter | 3 | $175 | $375–$750 | $525 |
| Quarter | 5 | $175 | $625–$1,250 | $875 |
| Quarter | 10 | $175 | $1,250–$2,500 | $1,750 |
| Quarter | 15 | $175 | $1,875–$3,750 | $2,625 |
| Quarter | 25 | $175 | $3,125–$6,250 | $4,375 |
| Half-dollar+ | 1 | $250 | $150–$400 | $250 |
| Half-dollar+ | 2 | $250 | $300–$800 | $500 |
| Half-dollar+ | 3 | $250 | $450–$1,200 | $750 |
| Half-dollar+ | 5 | $250 | $750–$2,000 | $1,250 |
| Half-dollar+ | 10 | $250 | $1,500–$4,000 | $2,500 |
| Half-dollar+ | 15 | $250 | $2,250–$6,000 | $3,750 |
| Half-dollar+ | 25 | $250 | $3,750–$10,000 | $6,250 |
Flat count×unit vs optional multi-ding discount
Some technician write-ups discount additional dings on the same panel (example framing: first dent full rate, each extra about half). That is not a fixed industry rule — the calculator leaves it off unless you tick the box. For dime-size dents at the $100 mid default, five flat dings are $500; with the optional model they fall to $300.
| Dent count | Flat count×unit | Multi-ding model | Difference |
|---|---|---|---|
| 1 | $100 | $100 | $0 |
| 2 | $200 | $150 | $50 |
| 3 | $300 | $200 | $100 |
| 5 | $500 | $300 | $200 |
| 8 | $800 | $450 | $350 |
| 12 | $1,200 | $650 | $550 |
What does a +25% aluminum / HSS upcharge add?
State Farm’s PDR agreement notes allow about +25% for aluminum (and lists HSS, double-layered, and some roof cases), with a maximum of one upcharge per panel in that matrix. On CarCalTune mid defaults, three dime dings go from $300 to $375 with the toggle on.
| Size | Count | No surcharge | With +25% | Extra |
|---|---|---|---|---|
| Dime | 1 | $100 | $125 | $25 |
| Dime | 5 | $500 | $625 | $125 |
| Quarter | 3 | $525 | $656 | $131 |
| Half-dollar+ | 2 | $500 | $625 | $125 |
State Farm PDR matrix samples (insurer reference, not a shop menu)
The PDF titled as a State Farm Paintless Dent Repair Agreement matrix (form marker 04-29-2025; retrieved 2026-10-23) bands each panel by dent count and size. A Very Light hood dime cell is $80; a Roof / Heavy / Quarter cell is $675. These are insurer agreement figures for education — not CarCalTune’s retail quote and not your local tech’s hail package.
| Panel | Band | Dime | Nickel | Quarter | Half |
|---|---|---|---|---|---|
| Hood | Very Light 1–5 | $80 | $100 | $125 | $150 |
| Door | Very Light 1–5 | $80 | $100 | $125 | $150 |
| Roof | Very Light 1–5 | $100 | $125 | $150 | $200 |
| Hood | Medium 31–50 | $300 | $350 | $425 | $500 |
| Roof | Heavy 51–75 | $475 | $550 | $675 | $800 |
Matrix notes also say: when a panel has mixed sizes, use the size that represents the majority; when dent count exceeds the grid, use MCE (Most Cost Effective). We do not invent missing cells — the hail path only returns amounts we published above.
Worked example: three dime-size door dings
Three accessible dime-size dings on a steel door, paint intact, no crease: at CarCalTune mid $100 each the ding path totals $300. With the optional multi-ding model the same job is $200. The State Farm Very Light door dime cell ($80) is in the same neighborhood for a 1–5 dent band on one panel — still an insurer matrix figure.
| Path | Working | Result |
|---|---|---|
| Flat mid | 3 × $100 | $300 |
| Low–high sweep | 3 × $75 to 3 × $150 | $225–$450 |
| Multi-ding model | $100 + 2 × $50 | $200 |
| +25% aluminum | $300 × 1.25 | $375 |
| SF door VL dime (ref) | matrix cell | $80 |
How the calculator aggregates
- A1: Assumes paint intact, no crease, access OK — otherwise PDR N/A (AAA).
- A2: Default = count × unit_mid (or your override), then optional +25% surcharge.
- A3: Optional multi-ding model (off by default): first dent 100%, each additional 50% of unit.
- A4: Hail path can show a State Farm sample matrix cell for education when we published that panel/band/size.
- A5: No tax, no R&I, no glass, no conventional bodywork, no deductible math.
- A6: Geographic variance ignored unless you override unit prices.
When not to use this calculator
- Paint is cracked, or the panel is creased — budget for body filler and paint instead.
- You need a written insurance estimate; use your carrier’s process, not this page.
- Full collision repairs (bumper replace, frame, mechanical) — try the car repair cost calculator.
Frequently asked questions
How much does paintless dent repair cost?
AAA Mid States says prices start below $100 for a single small dent and that PDR is generally about 65% less than traditional body repair when paint is intact. CarCalTune's illustrative mid defaults put one dime-size dent at $100 (range $75–$150) and five at $500; enter your shop's unit prices to replace those assumptions.
Is paintless dent repair cheaper than body shop repair?
AAA Mid States states PDR generally costs about 65% less than traditional body repair methods while preserving the factory finish — when the paint is not broken and the metal has not been stretched beyond memory.
When is PDR not an option?
AAA notes PDR is not an option if the paint is damaged, the dent is too large, the panel is creased or the metal is stretched beyond memory, or there is no tool access behind the panel.
What does the State Farm PDR matrix mean for my quote?
It is an insurer agreement matrix (panel × dent-count band × size), not a retail shop menu. Sample Very Light hood dime cells read $80 on the matrix we retrieved; your local PDR tech sets their own prices. Use the matrix path in the calculator only as an education check.
How much is hail damage paintless dent repair?
Metal Medic's technician guide says extensive hail jobs can run from around $1,000 up to several thousand for a whole vehicle. A State Farm sample Roof / Heavy / Quarter cell is $675 for that panel band — still an insurer matrix figure, not your shop's hail package.
Do aluminum panels cost more for PDR?
State Farm's matrix notes allow about +25% for aluminum (and separately for HSS, double-layered panels, or some roofs), with a maximum of one upcharge per panel in that agreement. Toggle the +25% surcharge in the calculator to see the effect on a CarCalTune assumption total.
How long does paintless dent repair take?
AAA Mid States says a simple PDR job can usually be done in under an hour, and even a car with extensive hail damage can often be completed in a day.
Should I claim PDR on insurance?
AAA's hail overview discusses comprehensive coverage versus your deductible; this calculator does not estimate deductibles or claim outcomes. Compare the estimate to your deductible before filing.
Sources
- AAA Mid States, Ding Dong the Dent is Dead: ~65% less than traditional repair; prices start below $100; timing notes; PDR limits (read 2026-10-23).
- AAA Automotive, Hail damage to your car: PDR when paint intact; insurance framing (read 2026-10-23).
- State Farm, Paintless Dent Repair Agreement matrix PDF (role-based-content-app.digital.statefarm.com; form marker 04-29-2025): panel × severity × size sample cells, +25% upcharges, corrosion $10/panel max $30 (retrieved 2026-10-23). Insurer matrix, not a retail menu.
- Metal Medic PDR Tools, How much should you charge for PDR repairs?: ~$75–$150 small; $150–$400+ larger; hail from ~$1,000; ~25% aluminum note (read 2026-10-23).
- CarCalTune model: js/pdr-calc.js (ding path + sample matrix lookup).
Related calculators
- Car repair cost calculator
- Car AC repair cost
- Dealer vs independent mechanic
- Fuel pump replacement cost
Updated 2026-10-23 · About CarCalTune · Changelog · Found an error? Use the contact page.