Subaru Head Gasket Replacement Cost Calculator

Budget a Subaru boxer head gasket job with four tools readable SERP guides did not ship as usable calculators: a boxer year/family × heads × path labor+parts matrix (EJ / FA·FB), a Subaru-seeded paste-your-quote fair/high/ripoff audit, a failure-mode → contingent cost branch, and a while-open package adder (timing / water pump / plugs / fluids-adjacent parts). Parent tool: head gasket replacement cost (generic layouts). Related: oil pan gasket replacement cost, timing belt and water pump replacement cost, thermostat housing replacement cost. Not a VIN quote. Confirm diagnosis before authorizing work.

Quick answer

First-screen answer: In this page's Subaru seed model, an EJ-classic both-heads in-car job at an independent shop runs about $4,000 (parts $1,400 including MLS set, TTY bolts, machine-shop for two heads, fluids, while-open pack and supplies; 20 h × $130/h). DIY parts about $1,400. Same inputs at a dealer/specialist seed about $5,120. FA/FB bands, one-head scope, and engine-out paths change hours. Edit every input — illustrative U.S. budgeting assumptions, not a national average.

Last updated 2026-11-08 · Uses Calcs.subaruHeadGasket. Hours and parts seeds are budgeting assumptions, not a published labor guide or OEM catalog. RepairPal's generic HG estimator was Cloudflare-blocked during research — we do not claim to beat a live RepairPal Subaru auditor.

Subaru head gasket cost tools

Defaults: EJ classic · both heads · in-car · 20 h · MLS $220 · TTY bolts $140 · machine $400 · fluids $110 · while-open pack $485 · supplies $45 · independent $130/h → shop $4,000.

Subaru stretch bolts — replace; never reuse

While-open package adder

Toggle add-ons often paired once a Subaru boxer is open. EJ defaults timing kit on; FA/FB defaults it off.

Paste-your-quote check (Subaru baseline)

Failure-mode → contingent cost lines

Check what diagnosis supports. The tool lists which $ lines stay contingent until teardown.

Result

Subaru boxer year / family × heads × path matrix

CoverageX-class guides publish a single “Subaru (any model)” row. Forums quote one shop number. This page exposes an input-driven EJ / FA·FB band × one-vs-both heads × in-car vs engine-out matrix that rebuilds labor hours and indie shop totals with the live while-open pack.

Calcs.SHG_FAMILY hours × independent $130/h + live parts/pack seeds. Illustrative budgeting — not a labor guide.
FamilyBoth · in-carBoth · engine-outOne · in-carOne · engine-out
EJ classic20.0 h → $4,00031.0 h → $5,43013.0 h → $2,73920.0 h → $3,649
EJ late18.0 h → $3,71028.0 h → $5,01012.0 h → $2,59218.5 h → $3,437
FA/FB16.0 h → $3,55025.0 h → $4,72011.0 h → $2,51717.0 h → $3,297

Subaru paste-your-quote fair / high / ripoff audit

Readable top-10 pages advise getting quotes or show a flat Subaru band. None audited a number you already hold against a Subaru family × heads × path baseline, or flagged missing MLS / TTY bolt / machine-shop lines. RepairPal (rank 5) was Cloudflare-blocked — treated as a provisional generic estimator, not a confirmed Subaru quote auditor.

Verdict bands vs modeled Subaru baseline (parts + hours × rate). Default EJ classic both in-car indie ~$4,000.
VerdictRuleWorked example
FairWithin about ±15% of baseline$3,400–$4,600 on the $4,000 seed → fair
HighAbout 15–40% over baseline$5,500 on $4,000 (~37.5% over) → high
Ripoff>40% over baseline$5,800+ on $4,000 → ripoff
Low>15% under baselineMay omit machine shop, TTY bolts, MLS scope, or while-open pack

Failure-mode → which cost lines stay contingent

Allied and CoverageX list Subaru symptoms without a failure-mode → dollar contingency map. Checkboxes above drive the live table; this static map shows the same branching logic.

Diagnosis cue → contingent lines until teardown. Budgeting honesty — not a remote diagnosis.
Failure modeLines that stay contingent
External oil weep (classic EJ)MLS oil-side focus; machine optional if no overheat; often both banks
External coolant at head jointMLS + flush; pressure-test contingent until open
Oil/coolant emulsionMachine almost required; head crack/replace adder contingent
Severe overheat / warp riskMachine + possible head replace; engine-out more likely
Combustion leak (block test)Confirm before authorizing; both-heads scope common on EJ

While-open package seeds (editable)

No readable top-10 page shipped a priced while-open package adder. CoverageX prose cites “extra parts once open $200–$500”; Quora mentions timing+HG together. This pack builder prices each add-on.

Default pack seeds in Calcs.SHG_WHILE_DEFAULTS — toggle in the calculator.
Add-onSeedDefault
Timing-belt kit (EJ belt engines)$280On for EJ bands; off for FA/FB
Water pump$95On
Spark plugs$70On
Thermostat$40On
Valve-cover gaskets$55Off

Worked example (EJ classic · both · in-car · indie)

Input → Calcs.subaruHeadGasket output. Same numbers appear in the live calculator defaults.
LineSeed
MLS gasket set (both)$220
TTY head bolts (both banks)$140
Machine shop (2 × $200)$400
Fluids$110
While-open pack (timing+WP+plugs+thermo)$485
Supplies$45
Parts subtotal$1,400
Labor 20 h × $130/h$2,600
Shop total$4,000
DIY parts$1,400
Dealer/specialist (20 h × $186/h + parts)$5,120

Assumptions & formula

hours = SHG_FAMILY[family].hours[heads + '_' + path]
parts = MLS + TTY bolts + (machine × heads?) + fluids + supplies + Σ(while-open add-ons)
shop = parts + hours × laborRate
verdict vs Subaru baseline: fair ±15%, high 15–40%, ripoff >40%

Family bands are budgeting labels for EJ classic / EJ late / FA·FB access patterns — not a VIN decoder. One-head MLS/bolts seeds scale to ~60%/55% of both-head defaults when not overridden. Sources for method shape: shop estimate line-item practice, torque-to-yield bolt replacement norms, and Subaru boxer dual-bank reseal patterns discussed in owner forums — not a scraped national average table.

Which paid coolant test is worth running before heads-off

The failure-mode checkboxes above map symptoms to cost lines. This ladder maps symptoms to the next paid test so you do not authorize a Subaru heads-off job on a housing leak, a radiator cap, or an oil-cooler trace. Every dollar below is an illustrative U.S. shop-visit seed — not a lab menu or a remote diagnosis.

Test-selection ladder before authorizing a Subaru boxer heads-off. Seeds are budgeting assumptions you can rewrite with local quotes.
What you already seeNext test worth paying forSeedHeads-off only ifStop / do not tear down yet
External oil sheen at the rear of the heads (classic EJ oil-side weep), no overheat, coolant level steadyNone required to find the weep — a cleanup and UV dye confirm the joint. A block test is optional insurance.UV dye ~$40 shop / block-test kit ~$20 DIYThe dye trail is the head-to-block joint and you already accept both-bank reseal laborThe trail is a valley pan, cam cover, or oil filter housing — those are not head-gasket hours
Coolant crust at the head joint or a sweet smell, pressure cap and hoses look soundCooling-system pressure test first (finds external seeps), then a block / combustion-leak tester on the coolant if the system holdsPressure test ~$80–$150; shop block test ~$80–$150 (DIY chemical kit ~$15–$40)Pressure holds or the only leak is the head joint, and the block test is positivePressure drops at the radiator, hoses, water pump, or thermostat housing — repair that leak before any heads-off quote
Unexplained coolant loss, overflow bottle burps at idle, or a misfire after a warm-upBlock / combustion-leak test before compression, then compression + leak-down if the block test is positive or a cylinder is deadBlock test ~$80–$150; compression + leak-down ~$150–$250Combustion gas in the coolant is confirmed, or leak-down escapes into the cooling jacketBlock test is negative and leak-down stays in-cylinder — look at a weak cap, heater core, or external seep next
Oil-in-coolant or mayonnaise without a failed block testDo not treat this as automatic heads-off. Pressure-test the cooling system and ask the shop to isolate the oil cooler / cooler lines (where fitted) before tearing the headsPressure test ~$80–$150; oil-cooler isolation is a diagnosis line, not a gasket jobThe shop shows the mixing is at the head gasket after cooler and housing paths are clearedThe cooler, oil-filter housing gasket, or a cracked plastic housing can mix fluids with the heads still on
Severe overheat, white exhaust, or a jumped-hot temperature gaugeBlock test + compression/leak-down together. Budget a machine-shop pressure test of the heads after they come off — that is not this pre-auth stepCombined diagnosis ~$230–$400 on the seeds aboveCombustion leak or a dead cylinder is confirmed; then the engine-out vs in-car hours below applyYou only have a story about “it ran hot once” and no test — do not authorize 16–31 labor hours on a story

Worked stop rule: a $120 pressure test that finds a $492-class thermostat housing leak (this site’s buried housing+thermostat independent seed) is cheaper than the default EJ-classic both-heads in-car gasket job (~$4,000). Pay the test. The combustion-leak chemical tester answers a different question than the pressure tester — one finds burned gas in coolant, the other finds external seeps. Running only one of them is how housing leaks get sold as head gaskets.

Engine-out vs in-car break-even hours (Subaru family bands)

The year/family matrix already prices both paths. This table isolates the extra engine-out hours and turns them into a break-even rule: engine-out is the cheaper path when the shop expects more than that many extra “fighting the car” hours to stay in the bay. Hours come from the same Calcs.SHG_FAMILY seeds as the matrix (EJ classic / EJ late / FA·FB). Dollars use the independent $130/h seed. Chassis names are budgeting labels, not a VIN decoder.

Extra engine-out hours = engine-out seed − in-car seed, at $130/h. Illustrative U.S. budgeting — not a labor-guide line.
Family bandTypical chassis labels (budgeting)Both-heads extra hoursExtra $ at $130/hOne-head extra hoursExtra $ at $130/h
EJ classic (20 h / 31 h both)Impreza/WRX GD, Legacy/Outback BH–BP, Forester SF–SH, Baja — external-leak-era boxers31.0 − 20.0 = 11.0 h$1,43020.0 − 13.0 = 7.0 h$910
EJ late (18 h / 28 h both)Later EJ revised-MLS years in the same chassis families28.0 − 18.0 = 10.0 h$1,30018.5 − 12.0 = 6.5 h$845
FA/FB (16 h / 25 h both)≈2012+ Impreza/Forester/Legacy/Outback FB20/FB25 and FA20/FA24 (including turbo FA20 as the same hour band here)25.0 − 16.0 = 9.0 h$1,17017.0 − 11.0 = 6.0 h$780

Break-even rule: ask the shop how many extra hours they expect to burn on broken exhaust studs, tight A/C lines, and piecemeal subframe pieces if they stay in-car. If that number is larger than the extra-hour column, the engine-out quote should win even before you price rust. Example: an EJ-classic both-heads in-car bid that is already 12 hours above the 20 h seed has already spent more than the 11 h engine-out premium ($1,430 at $130/h).

Engine-out also wins when the machine shop wants the long block or both heads on a bench, or when a used/reman short-block is in play (next section). It does not automatically win on a clean external-weep EJ with no overheat history — that job is why the in-car 20 h seed exists.

Used or reman short-block vs gasket-job crossover dollars

A gasket job fails as the cheaper repair when teardown adds cracked heads or a damaged block. Compare apples to apples: the gasket-job shop total plus the new contingency, versus a short-block path that already uses the engine-out labor band and still needs an MLS set and TTY bolts. Seeds below are illustrative U.S. budgeting assumptions, not classifieds or crate-engine invoices.

Crossover math on the EJ-classic both-heads seeds already used by this page ($4,000 in-car gasket job; 31 h engine-out labor at $130/h = $4,030).
PathHow the dollars add upIllustrative totalWhen this path wins
Gasket job, no extra damagePage seed: parts $1,400 + 20 h × $130$4,000Heads and block are reusable after a machine-shop pass — default winner
Gasket job + one cracked head$4,000 − $200 (drop one mill) + $1,100 used/reman head seed$4,900Still cheaper than a used short-block path if the block is sound
Gasket job + two cracked heads$4,000 − $400 mill + 2 × $1,100 heads$5,800Now inside a few dollars of the used short-block path — ask for both quotes
Used short-block + engine-out laborUsed EJ short-block $1,400 + 31 h × $130 ($4,030) + MLS $220 + TTY $140$5,790Wins once two heads are scrap or the block is damaged, if a sound used block is actually on the shelf
Reman short-block + engine-out laborReman short-block $2,800 + $4,030 labor + MLS $220 + TTY $140$7,190Wins against a gasket path only when the block is condemned and you want a warranty more than the used-block discount

Crossover line: stay on the gasket job while (gasket shop total + head/block contingency) stays under about $5,790 on these used-short-block seeds. Cross to a used short-block rewrite when two heads are scrap ($5,800 on the row above) or the block itself is damaged. Cross to reman (~$7,190) only when you are paying for the warranty on a condemned bottom end. Transfer of your intake, accessories, and oil pump is assumed inside the 31 h engine-out band — if the shop prices those as extra hours, add them to the short-block side before you decide.

These crossover dollars reuse the same EJ-classic seeds as the matrix and the worked example ($4,000 / 20 h / 31 h / $130/h). They do not invent a second Subaru mother-word and they are not a classifieds average.

Machine-shop menu the lump $400 seed does not itemize

The quote-audit fields already take one machine-shop dollar (default $400 for two heads in the worked example: 2 × $200). The family matrix does not split that lump. This menu itemizes what a machine shop actually invoices so you can see when the $400 seed is enough and when a valve job or thread repair should be added — without changing the calculator’s default $400.

Illustrative machine-shop line items per Subaru boxer head. The $400 both-heads seed ≈ two pressure tests + two surfacing passes + a shop handling fee.
LineWhen it appliesSeed eachBoth headsAlready inside the $400 lump?
Pressure-test the castingEvery head that came off after overheat, emulsion, or a failed block test — do this before milling$60$120Yes, this is why the lump exists
Resurface / mill the deckLight warp or a used MLS requires a flat deck; skip only if the shop measures the deck in spec and the failure was a clean external oil weep with no heat$100$200Yes
Shop handling / assembly checkCleaning, inspection, and boxing$40$80Yes ($120 + $200 + $80 = $400)
Valve job (grind / reseat)Only if leak-down escaped through a valve, or the seats are burned after overheat$180$360No — add this on top of $400
Time-sert / thread repairA pulled TTY hole. Subaru stretch bolts are single-use; pulled threads are a separate invoice$20 per holeDepends on countNo — one pulled hole is a $20 adder; four holes on one bank is $80
Replace the head instead of millingCrack in the combustion chamber, or the deck is already below minimum thicknessUse the $1,100 used/reman head seed in the crossover tableOne or bothNo — drop the mill for that head and switch to the short-block / head-replace math

Worked adders: a clean external-weep EJ with no overheat can justify asking whether both mills are required, but do not reuse TTY bolts either way. An overheat-plus-positive-block-test job should expect the $400 lump plus a valve job if leak-down fails through the valves ($400 + $360 = $760 machine-shop on both heads) before you compare a short-block rewrite. None of these adders change the first-screen $4,000 seed unless you edit the calculator’s machine field yourself.

FAQ

How much does a Subaru head gasket replacement cost?

In CarCalTune's Subaru seed model, an EJ-classic both-heads in-car job at an independent shop runs about $4,000 (parts $1,400 including MLS set, TTY bolts, machine-shop for two heads, fluids, while-open pack and supplies; 20 h × $130/h). DIY parts about $1,400. FA/FB bands and one-head or engine-out paths change hours. Editable illustrative U.S. budgeting assumptions, not a national average or VIN quote.

Why are Subaru head gasket jobs often both heads?

On many EJ-era boxers, shops reseal both banks once the engine is open because labor access dominates cost. This page lets you switch one vs both heads and rebuild hours and parts. Confirm written scope before comparing quotes.

Is a $5,500 Subaru head gasket quote a ripoff?

Paste the quote into this page's Subaru-seeded fair/high/ripoff checker with matching family, heads, and path. On the default EJ-classic both-heads in-car independent seed (~$4,000 with while-open pack), $5,500 is in the high band (~37.5% over). Match MLS, TTY bolts, machine shop, and while-open lines before judging. RepairPal's generic HG estimator was not readable during research — this is not a claim that we beat a live RepairPal Subaru auditor.

Should timing belt and water pump be done with a Subaru head gasket?

On belt-driven EJ engines, many shops pair a timing-belt kit and water pump while the front of the engine is open. This page's while-open package adder toggles timing kit, water pump, plugs, thermostat, and valve-cover gaskets with editable dollars. FA/FB chain engines default timing kit off. See also timing belt and water pump replacement cost.

Do Subaru head gaskets need new bolts?

Yes — Subaru boxers use torque-to-yield (stretch) head bolts that must be replaced. This page seeds $140 for both banks and flags missing bolt lines when you paste a quote. Never reuse stretch bolts.

EJ vs FA/FB — does the cost model change?

Yes. The family selector changes base hours and MLS/bolt/machine seeds. EJ classic seeds the longest in-car both-heads hours (20 h here). FA/FB seeds shorter hours and turns the timing-belt kit off by default because those engines are chain-driven.

Are these national average Subaru head gasket prices?

No. Every dollar is an illustrative U.S. budgeting assumption you can edit — not a national average and not a VIN quote. Confirm diagnosis (block test, compression, leakdown) before authorizing work.

How is this different from the generic head gasket calculator?

The parent head gasket replacement cost page covers I4/V6/V8/boxer layouts generically. This page is Subaru-only: year/family matrix, one-vs-both heads, Subaru-seeded quote audit, failure-mode contingency, and a while-open pack tuned for EJ timing vs FA/FB.

Last updated: November 8, 2026. · About · Changelog