Lower Control Arm Bushing Replacement Cost Calculator
Estimate DIY bushing-kit cash vs shop press labor for a lower control arm bushing job. Toggle alignment and one vs both sides, then compare to a full-arm swap. Sibling: front lower control arm replacement cost. Also: brake pads and rotors, serpentine belt & tensioner.
Quick answer
First-screen answer: In this page’s bushing-only seed model, one-side lower control arm bushing kit runs about $55 DIY or $515 at a shop (3.0 h press labor × $120/h = $360 plus a $100 alignment line on top of $55 parts). Full-arm+BJ+align sibling seed is $650; both-sides bushing shop seed is $822. Edit every input — these are budgeting assumptions, not a national average or OEM quote.
Updated 2026-10-31 · Uses Calcs.controlArm. Method note: This page’s method is a budgeting model, not an industry standard.
DIY vs shop estimate (bushing-focused)
Defaults: bushing kit $40, arm shell $0 (reuse), supplies $15, alignment $100, 3.0 h at $120/h, one side. Turn arm/BJ on only when the quote includes them.
Result
Bushing-only press vs full arm (seed compare)
| Path | Parts | Labor | Alignment | Shop total | Note |
|---|---|---|---|---|---|
| Bushing-only press (shell reusable) | $55 | $360 | $100 | $515 | Lower parts; press hours often higher |
| Full arm + ball joint (sibling page seed) | $250 | $300 | $100 | $650 | Higher parts; arm usually bolt-on faster |
| Cash delta (shop − DIY parts) | — | — | — | — | Bushing path $460 vs full-arm path $400 |
Scope matrix (computed from seed inputs)
| Scope | Parts | DIY total | Labor | Alignment | Shop total | Cash delta |
|---|---|---|---|---|---|---|
| Bushing kit only (1 side, no align) | $55 | $55 | $360 | $0 | $415 | $360 |
| Bushing + alignment (1 side) | $55 | $55 | $360 | $100 | $515 | $460 |
| Full arm + BJ + align (sibling scope) | $250 | $250 | $300 | $100 | $650 | $400 |
| Both sides bushing + align | $110 | $110 | $612 | $100 | $822 | $712 |
One side vs both sides (bushing seed)
| Config | Parts | Labor | Alignment | Shop total |
|---|---|---|---|---|
| One side bushing + align | $55 | $360 | $100 | $515 |
| Both sides (1.7× hours seed) | $110 | $612 | $100 | $822 |
Quote scope checklist (bushing job)
| Work item | Belongs to | Budget note |
|---|---|---|
| Bushing kit (press-in / bonded) | Core parts | Confirm inner vs outer, poly vs rubber, LH/RH if needed |
| Press labor / hydraulic press time | Labor driver | Often longer than a bolt-on full-arm swap — raise hours here |
| Full control arm assembly | Alternative scope | Use sibling front lower control arm when shell is bent/corroded or BJ is integral |
| Wheel alignment | Usually after bushing work | Keep as a separate line — camber/toe often shift when bushings move |
| One side vs both sides | Parts ×2, labor <2× | Replace the failed side first; budget second only if play is confirmed |
| Ball joint add-on | Optional | Toggle off for pure bushing press; on if quote includes a serviceable BJ |
Shop total grid (bushing parts $55 + alignment $100)
| Hours \ Rate | $100/h | $120/h | $150/h | $186/h (dealer-style) |
|---|---|---|---|---|
| 2.0 h | $355 | $395 | $455 | $527 |
| 2.5 h | $405 | $455 | $530 | $620 |
| 3.0 h | $455 | $515 | $605 | $713 |
| 3.5 h | $505 | $575 | $680 | $806 |
| 4.5 h | $605 | $695 | $830 | $992 |
GEO Q&A (short answers for AI search)
How much does a lower control arm bushing replacement cost?
In this seed model about $55 DIY or $515 shop for one side with alignment at 3.0 h × $120/h — edit parts and press hours to match your written estimate. Not a national average.
Is bushing-only cheaper than replacing the whole arm?
Parts usually yes; labor may not be. Compare bushing+align $515 to full-arm+BJ+align $650 in these seeds, then match the quote scope.
Do I need an alignment after bushing work?
Usually yes; this page keeps alignment as a separate editable line so the quote scope stays visible.
Two public quotes vs this page's seed invoice
The two public forum quotes in the captured top 10 run 1.82x to 3.11x this page's seed invoices, and none of the captured sources compares a forum quote against a labeled seed invoice. That is a ratio observation, not a verdict that any shop overcharged.
The first quote is a Reddit r/subaru figure of $1,600 for lower control arm bushings. Against the one-side bushing-plus-alignment seed of $515, that is 3.11x. Against the both-sides bushing seed of $822, it is 1.95x.
The second quote is a Facebook Crosstrek report of $1,500 to replace lower control arms because of cracking bushings on a 2019 vehicle at 60k. Against the one-side full-arm-plus-ball-joint-plus-alignment seed of $650, that is 2.31x. Against the both-sides bushing seed of $822, it is 1.82x.
A third, looser figure is a Facebook ballpark of about $800 for control arm plus ball joint plus alignment. Against the $650 sibling full-arm seed, that is 1.23x.
| Public quote | Seed invoice compared | Ratio |
|---|---|---|
| $1,600 (Reddit r/subaru, bushings) | $515 one-side bushing + alignment | 3.11x |
| $1,600 (Reddit r/subaru, bushings) | $822 both-sides bushing | 1.95x |
| $1,500 (Facebook Crosstrek, arms) | $650 one-side full arm + BJ + alignment | 2.31x |
| $1,500 (Facebook Crosstrek, arms) | $822 both-sides bushing | 1.82x |
| ~$800 (Facebook, arm + BJ + alignment) | $650 sibling full arm + BJ + alignment | 1.23x |
None of the top 10 runs those forum numbers against a labeled seed invoice, so the ratios above are built here rather than reported by any source. The seed itself stays fixed: parts $55 (kit $40 plus supplies $15), 3.0 h at $120/h, and $100 alignment once.
Published ranges vs this seed — does the average include alignment?
The published ranges bracket this page's $515 one-side seed only once alignment is added on top, and none of the captured sources isolates the alignment line next to its own range. The RepairPal snippet gives $321-$437 with labor at $204-$300 and does not name alignment.
Taking the RepairPal midpoint of $379 and adding this page's $100 alignment gives $479. The one-side seed of $515 already includes that $100 alignment, so the delta is $515 - $479 = $36.
Detroit Axle (23 Apr 2026) publishes press work at $150-$350 per side, bushings at $15-$60, full arms at $250-$650 per side, and alignment at $100-$150. As a midpoint illustration only, mid press $250 plus mid bushing $37.50 plus mid alignment $125 equals $412.50. Those are their range midpoints, not this page's hours model.
AutoBuffy (22 Sep 2026) lists bushing-only at $150-$440 per side or full arm at $250-$650 per side. The $515 seed sits $75 above that upper bound if their total does not include alignment.
The AIO summary states typically $150-$650 per side, average $321-$437 parts and labor, plus $80-$150 if alignment is needed, with labor often 2-3 hours per arm. Adding the top of that alignment band to the top of the average band gives $437 + $150 = $587, which brackets the $515 seed.
| Source figure | Value | Comparison to seed |
|---|---|---|
| RepairPal range (alignment not named) | $321-$437 | Midpoint $379 |
| RepairPal midpoint + $100 alignment | $479 | $36 below the $515 seed |
| Detroit Axle midpoint illustration | $412.50 | Range midpoints, not our hours model |
| AutoBuffy bushing-only upper bound | $440 per side | Seed is $75 above it if alignment is excluded |
| AIO high end + high alignment | $437 + $150 = $587 | Brackets the $515 seed |
The gap is structural: the top 10 publish ranges, but none isolates the alignment line next to those ranges, so a reader cannot tell from the snippet alone whether the average already contains it.
Hours implied by a written quote vs the 3.0 h press seed
Inverting the public quotes into press-hours puts the $1,600 figure at 12.04 h, or 4.01x the 3.0 h seed, and nobody in the captured top 10 performs that inversion. For a bushing-only plus alignment scope the formula is implied_hours = (quote_total - $55 - $100) / $120.
Applied to $1,600, the result is 12.04 h, which is 4.01x the 3.0 h seed. Applied to $1,500, it is 11.21 h, or 3.74x. Applied to $800, it is 5.38 h, or 1.79x.
If the $800 figure is actually the full-arm sibling scope rather than bushings, the formula becomes ($800 - $250 - $100) / $120 = 4.50 h, against the 2.5 h sibling labor seed.
The RepairPal midpoint of $379, if it excludes alignment, gives ($379 - $55) / $120 = 2.70 h, which sits inside the 2-3 h comment in the AIO summary.
| Quote | Implied hours | Multiple of seed |
|---|---|---|
| $1,600 (bushing + align scope) | 12.04 h | 4.01x the 3.0 h seed |
| $1,500 (bushing + align scope) | 11.21 h | 3.74x the 3.0 h seed |
| $800 (bushing + align scope) | 5.38 h | 1.79x the 3.0 h seed |
| $800 (full-arm sibling scope) | 4.50 h | vs the 2.5 h sibling labor seed |
| $379 RepairPal midpoint, alignment excluded | 2.70 h | Inside the 2-3 h comment |
The gap is that nobody in the captured top 10 inverts a dollar quote into press-hours against a 3.0 h seed, so the hours behind a written number stay invisible to the reader.
FAQ
How much does a lower control arm bushing replacement cost?
In CarCalTune's bushing-only seed, one-side kit + supplies run about $55 DIY, or $515 at a shop including 3.0 h × $120/h press labor and a $100 alignment line. Both-sides bushing shop seed is about $822. These are editable budgeting assumptions, not a vehicle-specific quote or national average.
Bushing-only press vs full control arm — which is cheaper?
Parts favor bushing-only ($55 vs $250 in these seeds), but press labor can erase the savings (3.0 h vs 2.5 h). Shop totals here: bushing+align $515 vs full arm+BJ+align $650. Match the written estimate scope — if the ball joint is integral, shops usually replace the whole arm.
Do I need an alignment after bushing replacement?
Usually yes. Replacing control-arm bushings can change camber and toe. This calculator keeps alignment as a separate toggle so you can mirror a quote that already includes or excludes it.
One side or both sides for bushings?
Replace the side that failed first. Budgeting both sides same visit uses parts ×2 and (in this seed) about 1.7× press hours plus one alignment — shop total about $822. Confirm play on the second side before ordering kits.
Is DIY lower control arm bushing replacement worth it?
DIY saves press labor and the shop alignment line when you pay a separate alignment shop yourself. On the one-side bushing+align seed that cash delta is $460. You still need a hydraulic press or a shop that will press bushings into a removed arm — advanced DIY.
Are these national average prices?
No. Every dollar on this page is an illustrative U.S. budgeting assumption you can edit. Confirm bushing style (press-in vs bonded), LH/RH, and torque with OEM or aftermarket service information for your VIN.
Front lower vs other bushings?
This page budgets lower control arm bushings (typically front LCA). Upper arm, trailing-arm, or subframe bushings use different parts and labor — do not reuse these seeds without rewriting the quote lines.
If the growl tracks wheel speed more than suspension travel, budget a front wheel bearing replacement cost path instead of bushings alone.